Products
Microstrip Isolator
Oersicht
De foardielen fan microstrip isolators befetsje lytse grutte, licht gewicht, lytse romtlike diskontinuïteit as yntegrearre mei microstrip circuits, en hege ferbining betrouberens.De relative neidielen binne lege krêftkapasiteit en minne wjerstân tsjin elektromagnetyske ynterferinsje.
Prinsipes foar it selektearjen fan mikrostrip-isolators:
1. As decoupling en oerienkommende tusken circuits, kin microstrip isolators selektearre.
2. Selektearje it korrespondearjende produktmodel fan 'e mikrostrip-isolator basearre op it frekwinsjeberik, ynstallaasjegrutte en oerdrachtrjochting brûkt.
3. Wannear't de bestjoeringsfrekwinsjes fan beide dimensjes fan mikrostrip-isolators oan 'e gebrûkseasken foldwaan kinne, hawwe produkten mei gruttere voluminten algemien hegere krêftkapasiteit.
Circuit ferbinings foar microstrip isolators:
De ferbining kin makke wurde mei manuele soldering mei koperen strips of gouddraadbonding.
1. By it keapjen fan koperen strips foar hânlieding welding interconnection, de koper strips moatte wurde makke yn in Ω foarm, en de solder moat net soak yn it foarmjen gebiet fan 'e koper strip.Foardat welding moat de oerflaktemperatuer fan 'e isolator bewarre wurde tusken 60 en 100 ° C.
2. By it brûken fan gouden wire bonding interconnection, de breedte fan de gouden strip moat wêze lytser as de breedte fan de microstrip circuit, en gearstalde bonding is net tastien.
Gegevensblêd
| RFTYT 2.0-30GHz Microstrip Isolator | |||||||||
| Model | Frekwinsjeberik (GHz) | Ynfoegje ferlies(dB)(Max) | Isolaasje (dB) (min) | VSWR(Max) | Operaasje temperatuer (℃) | Pykkrêft (W) | Reverse Power (W) | DiminsjeW×L×Hmm | Spesifikaasje |
| MG1517-10 | 2.0~6.0 | 1.5 | 10 | 1.8 | -55-85 | 50 | 2 | 15,0*17,0*4,0 | |
| MG1315-10 | 2.7~6.2 | 1.2 | 1.3 | 1.6 | -55-85 | 50 | 2 | 13,0*15,0*4,0 | |
| MG1214-10 | 2.7~8.0 | 0.8 | 14 | 1.5 | -55-85 | 50 | 2 | 12,0*14,0*3,5 | |
| MG0911-10 | 5.0~7.0 | 0.4 | 20 | 1.2 | -55-85 | 50 | 2 | 9,0*11,0*3,5 | |
| MG0709-10 | 5.0~13 | 1.2 | 11 | 1.7 | -55-85 | 50 | 2 | 7.0*9.0*3.5 | |
| MG0675-07 | 7.0~13.0 | 0.8 | 15 | 1.45 | -55-85 | 20 | 1 | 6,0*7,5*3,0 | |
| MG0607-07 | 8,0-8,40 | 0.5 | 20 | 1.25 | -55-85 | 5 | 2 | 6.0*7.0*3.5 | |
| MG0675-10 | 8.0-12.0 | 0.6 | 16 | 1.35 | -55~+85 | 5 | 2 | 6.0*7.0*3.6 | |
| MG6585-10 | 8.0~12.0 | 0.6 | 16 | 1.4 | -40~+50 | 50 | 20 | 6,5*8,5*3,5 | |
| MG0719-15 | 9.0~10.5 | 0.6 | 18 | 1.3 | -30~+70 | 10 | 5 | 7,0*19,5*5,5 | |
| MG0505-07 | 10.7~12.7 | 0.6 | 18 | 1.3 | -40~+70 | 10 | 1 | 5.0*5.0*3.1 | |
| MG0675-09 | 10.7~12.7 | 0.5 | 18 | 1.3 | -40~+70 | 10 | 10 | 6,0*7,5*3,0 | |
| MG0506-07 | 11~19.5 | 0.5 | 20 | 1.25 | -55-85 | 20 | 1 | 5.0*6.0*3.0 | |
| MG0505-07 | 12.7~14.7 | 0.6 | 19 | 1.3 | -40~+70 | 4 | 1 | 5.0*7.0*3.0 | |
| MG0505-07 | 13.75~14.5 | 0.6 | 18 | 1.3 | -40~+70 | 10 | 1 | 5.0*5.0*3.1 | |
| MG0607-07 | 14.5~17.5 | 0.7 | 15 | 1.45 | -55~+85 | 5 | 2 | 6.0*7.0*3.5 | |
| MG0506-08 | 17.0-22.0 | 0.6 | 16 | 1.3 | -55~+85 | 5 | 2 | 5.0*6.0*3.5 | |
| MG0505-08 | 17.7~23.55 | 0.9 | 15 | 1.5 | -40~+70 | 2 | 1 | 5.0*5.0*3.5 | |
| MG0605-07 | 18.0~26.0 | 0.6 | 1 | 1.4 | -55~+85 | 4 | 5.0*6.0*3.2 | ||
| MG0445-07 | 18.5~25.0 | 0.6 | 18 | 1.35 | -55-85 | 10 | 1 | 4.0*4.5*3.0 | |
| MG3504-07 | 24.0~41.5 | 1 | 15 | 1.45 | -55-85 | 10 | 1 | 3.5*4.0*3.0 | |
| MG0505-08 | 25.0~31.0 | 1.2 | 15 | 1.45 | -40~+70 | 2 | 1 | 5.0*5.0*3.5 | |
| MG3505-06 | 26.0~40.0 | 1.2 | 11 | 1.6 | -55~+55 | 4 | 3.5*5.0*3.2 | ||
| MG0511-06 | 27.0~-31.0 | 0.7 | 17 | 1.4 | -40~+75 | 1 | 0.5 | 5.0*11.0*5.0 | |
| MG0505-07 | 27.0~31.0 | 1 | 18 | 1.4 | -55~+85 | 1 | 0.5 | 5.0*5.0*3.5 | |
| MG0505-06 | 28.5~30.0 | 0.6 | 17 | 1.35 | -40~+75 | 1 | 0.5 | 5.0*5.0*4.0 | |
